CAN Alarm - CAN Alarm J1939-15; Large Panel Mount and Wires Termination. Panel mount piezo alarm that functions on the any CAN Network using the SAE J1939-15 protocol. It is arbitrary address capable, meaning it can claim a different address if an address conflict occurs. Rather than being "pre-canned" with specific sounds, the device is configurable for many sounds or tones via messages received on the network. This allows the alarm to be useful to communicate multiple audible tones/sounds for different alarm conditions. A detailed Communications Reference specifies tone types and specific PGN instructions for activating different tone and sound combinations on the network.
|Operating Mode||Extra Loud Multiple Tone|
|Operating Voltage||9-30 Vdc|
|Operating Frequency||1800±250 Hz|
|Typical Operating Current||30 mA at 9 Vdc|
40 mA at 30 Vdc
|Typical Sound Pressure||0 ±5 dB(A) at 9 Vdc at 24 inches (61 cm), at 25°C|
108 ±5 dB(A) at 30 Vdc at 24 inches (61 cm), at 25°C
|Termination Strength||Pull test with a maximum of 22 pounds (10 kg) load|
|Operating Temperature||-20_C to +65_C|
|Storage Temperature||-40_C to +85_C|
|Surge Voltage||20% over maximum rated voltage for less than 5 minutes|
|Reverse Voltage Protection||To the maximum operating voltage|
|Construction Materials||Case- Plastic _NORYL_ N-190, Flame Retardant UL 94-VO, Black|
Internal Circuit- Audio-oscillator and piezoelectric driver
Diaphragm- Stainless Steel 305
|Gasket||Gasket 0.062" thick, 60 Durometer Neoprene|
|Construction Materials||ASTM B117 Certified - Withstands exposure to salt spray for 300 hours|
IP 68 Certified - Withstands water submergence and dust exposure
Humidity- 95% relative humidity at +40_C continuously for 100 hours.
Vibration- Withstands vibration between 0 and 55 Hz. on all axes.
|Life Expectancy||10 years under normal operating conditions.|
|Warranty||For a period of two years from the date of manufacture under normal operating conditions.|
|Terms and Conditions of Sale||Link here|